Skip to main content
Magenta Adhi Solusi

How to Set Up Microphones and Avoid Feedback

Feedback is the squeal or hum that appears when a microphone picks up sound from a speaker, and that sound is amplified and played again. The loop gets louder until it howls.

Prevention steps

  1. Keep microphones away from speakers. Never point a microphone at a speaker. Place speakers in front of the person talking.
  2. Lower gain and volume. Raise them slowly until the sound is loud enough, and stop before it starts to ring.
  3. Bring the microphone close to the speaker's mouth. A close microphone does not need high gain.
  4. Mute microphones that are not in use. Every open microphone adds to the chance of feedback.
  5. Mind the room. Hard surfaces bounce sound back to the microphone.

Pick a suitable microphone type

Wireless microphones give freedom of movement. Wired microphones avoid signal interference. Our catalog has examples of both, such as the Victory Microphone DR-666 (wireless) and the DR-666CB (wired), according to their product descriptions. See the whole microphone category.

The role of a mixer

A mixer lets you set the level of each microphone and pull down the ones not in use. See also the mixer category.

If it still rings

Re-check speaker and microphone positions and test with someone in each corner of the room. For a more complex installation, contact us.

Back to blog

Not sure where to start?

Experience our smart system solutions in action. See how our audio, video, and integration technology can transform your workspace.